2 edition of Precautions to be taken when carrying out work in the vicinity of underground gas pipes found in the catalog.
Precautions to be taken when carrying out work in the vicinity of underground gas pipes
British Gas Corporation.
|The Physical Object|
C.O.W. operation is not carried out under the C.O.W. operation plan, or if communication between the C.C.R. and main deck is lost. Discharge operations are to be suspended due to lightning in the vicinity of the vessel. If the required safety precautions are described and covered above, it cannot be followed. If terminal instruct to do so. Washing facilities – access to suitable washing facilities by sanitary conveniences, changing facilities and as required in work areas. Showers may be necessary if the work is dirty, strenuous or involves potential contamination with hazardous substances. Washing facilities should have hot and cold (or warm) running water, soap and towels (or other means of drying).
Underground services include: electricity mains gas mains and distribution pipes water mains telecommunications cables sewers and foul drainage systems. All have the potential to cause fatal injuries both to those carrying out the excavation and others in the vicinity of the work. Further notes on the use and limitations of plans for electricity cables and gas pipes are given in Precautions for particular services In certain cases, such as construction site work and large-scale road excavation work, it is recommended to transfer the information onto the working plans for the guidance of those carrying out the work.
A method of informing the persons carrying out the work of the exact identity, location, nature and extent of the job, the hazards involved and the precautions to be taken, and A system for ensuring the safe hand-back of the workplace after the job is completed and, in the case of confined space entry, after the space is vacated. Underground Utility Depths for Water, Gas and Electricity Supply Pipes and Cables. In this DIY guide you will learn about the required depths that utility supply pipes and cables such as water pipes, gas pipes and electrical supply cables need to be buried to in order to reduce the risk of damage when excavating and digging in the ground.
Our ancestors, builders of civilization
How to play billiards.
Lawasia93, Colombo, Sri Lanka, 12-16 Sept. 1993
Albright-Knox Art Gallery--the painting and sculpture collection
Customs refund on re-exports.
Children with cancer
effects of living wage laws
Brittany (Berlitz Travel Guide)
Kaisers merchant ships in World War I
macrolichens of New England
Shop stewards handbook
early Jesuit missions in North America
Not be carried out in the vicinity of exposed gas pipes without consent from National Grid and a prior agreement of precautions that will ensure the integrity of plastic pipes and protective coatings.
Shuttering must be constructed so as to prevent fresh concrete encasing National Grid gas apparatus and to maintain the stated clearances. esp utilities group limited guidance note - esp/hsg47 version june uncontrolled when printed page 1 of 2 precautions to be taken when carrying out work in the vicinity of underground gas pipes.
Underground electrical cables can be particularly hazardous because they often look like pipes and it is impossible to tell if they are live just by looking at them.
Damage to underground electrical cables can cause fatal or severe injury and the law says you must take precautions to avoid danger. third parties carrying out work in the vicinity of Cadent gas assets and associated installations. It is provided to ensure that individuals planning and undertaking work take appropriate measures to prevent damage.
Any damage to a gas asset, or its coating can affect. to safely carry out excavation work in the vicinity of underground cables. Available at nearby services such as gas pipes. If a gas pipe ignites it can further fuel the fire.
4 you should take suitable precautions to prevent damage while other works are going ahead. For. electric lines, gas pipes, water pipes, sewers, telecommunications infrastructure and cables. PNP16 ObjID: A page 6 of 31 Version (1 September ). A person who carries out, or permits to be carried out, any works in the vicinity of a gas pipe shall ensure that all reasonable measures are taken to protect the gas pipe from damage arising out of the works that would be likely to prejudice safety.
Failure to do so can result in a – Maximum Fine of HK$, and imprisonment of 12 months. This specification is for issue to third parties carrying out work in the vicinity of National Grid high pressure gas pipelines (above 7 bar gauge) and associated installations and is provided to ensure that individuals planning and undertaking work take appropriate measures to prevent damage.
(j)(1)(vii) Whenever five percent or more of the lower explosive limit for methane or other flammable gases is detected in any underground work area(s) or in the air return, steps shall be taken to increase ventilation air volume or otherwise control the gas concentration, unless the employer is operating in accordance with the potentially gassy or gassy operation requirements.
Work Permit:Ensure proper Pemit-To-Work is obtained as per the Permit-to-Work (TPSMS/CSP/PTW/) procedures.
Safety Aspects:Following important safety aspects shall be implemented during execution of excavation activity at project site: Safe access: a. Safe access must be provided to excavations by means of ladders, stairs or.
Gas pipes 6 Water pipes and sewers 7 Telecommunications cables 7 This COP gives recommendations and practical guidance on how to carry out excavation work safely in the Excavation carried out in the vicinity of underground services includes work associated with a.
A gas service pipe should normally be laid with a minimum depth of cover of mm in private ground and mm in footpaths and highways. However, these depths are only a guide and should not be relied on when carrying out work near gas services or mains. Safety Precautions: For the operations to be followed, (Tank cleaning, H.C.
Gas Purging, Gas Freeing, and Re-Inerting), the Chief Officer shall carry out the following precautions. Detailed guidance on preparations and safety precautions are also described within relevant sections of ISGOTT. This work procedure sets out the safety precautions and other conditions affecting the design, construction and maintenance of services, structures and other works in the vicinity of NGN pipelines and associated installations operating at pressures greater than 7 bar gauge, located in both negotiated easements (see Section 12) and public highways.
LCQ Telecommunications infrastructure ***** Following is a question by the Hon Charles Peter Mok and a written reply by the Secretary for Commerce and Economic Development, Mr Gregory So, in the Legislative Council today (May 6): Question: It is learnt that incidents of works contractors damaging underground optical fibre cables or telecommunications devices when carrying out.
Our records show that there are existing watermains within and in the vicinity of your development lot. The Developer / Contractor is required to notify/obtain a written clearance from PUB (WSN) before carrying out any earth work/ piling work/ building work at the site, satisfying all the Conditions and Requirements set hereunder.
More specifically, it is defined by the British Standards Institution (BSI) in BS as “any procedure that might involve or have the potential to generate sufficient heat, sparks or flame to cause a fire. Hot work includes welding, flame cutting, soldering, brazing, grinding and the use of other equipment incorporating a flame, e.g.
tar boilers, etc.”. The severity of these precautions reflects those of the risks and probable hazards inherent in these spaces.
Make no mistake, a confined space can just as easily become a tomb for the careless, take the correct health & safety precautions though and a mild brush with claustrophobia should be the worst of your worries.
Kai Young. If the operator has to top up the hydraulic oil state two precautions to keep cleanliness of the material.
If the excavator is carrying out deep excavation work using the full working range what hazard may occur. What is the nearest distance allowed to gas pipes when excavating in a machine. The Work Party shall request for and obtain as-built services drawings from the parties above to serve as references in order to produce an excavation/piling work plan and to work out a services protection and/or diversion scheme.
The Work Party shall carry out services detection on site through. Gas pipes 12 Damage to gas pipes can cause leaks which may lead to fire or explosion (see Figure I).There are two types of damage: that which causes an immediate leak; that which causes a leak some time later The damage may occur at the time the work is carried out or subsequently: for example poor.
• Use hand held power tools, i.e. jack hammers within m of a gas main. • Carry out piling work within 15m of a gas main without prior consultation with Gas Networks Ireland.
• Welding or hot works should not be carried out in the vicinity of an exposed gas main without prior consultation with Gas Networks Ireland.the vicinity of the work. Provision of a safe system of work is essential and tree work should be undertaken by trained and experienced personnel.
A suitable and safe method should be adopted and adequate occupational safety and health measures should be implemented in carrying out the tree work. Such information, instruction.